Besafe X3-GB User Manual

10+/1 0-18 kg 6m-4yECE R44 04USER MANUALREARWARD- & FORWARD-FACINGGROUP WEIGHT AGE

18 19!Sleeping position• The seat has 5 reclining positions• By pulling the reclining lever. upwards, the seat can be put in another position (33).M

20 21wash with similar colours• DO NOT use the seat without floor support when mounted rearward-facing.• DO NOT use the seat without tightening the f

22 23Important advicePractical advice• DO NOT attempt to dismantle, modify or add any part to the seat. Warranty will expire if non-original parts or

24HTS BeSafe asN-3535 Krøderen, Norway - www.besafe.euGuarantee• All BeSafe products are carefully designed, manufactured and tested. All of our BeSa

2 3!!Thank you for choosing BeSafe iZi Combi. ContentsVital information• It is NOT ALLOWED to mount the seat in a front passenger seat WITH AN ACTIVA

4 5!It is NOT ALLOWED to mount the seat in a front passenger seat WITH AN ACTIVATED AIRBAG.Preparing to install Rearward-facing in the back or front s

6 7The floor support must go through the belt loop. The belt loop must also be led into the hook on the floor support (2).Do not fasten the locking bolt

8 9!Position the 3 point car belt. Place the hip belt over the base of the seat behind the belt guiding horns on each side (see green arrows 1 and 2 i

10 11Lock the floor support with the locking bolt (14).22-(14)Pull out the shoulder belt and make it into a loop (10a).Thread the loop through the meta

12 13Place the seat sideways into the car with the front brace towards you.Turn the seat into the right position (with the front brace against the bac

14 15Move the front brace outwards with the ratchet. Continue tightening until the brace is pressed well into the back rest of the vehicle seat (19).C

16 17Positioning of the childPosition of the shoulder straps: Check that the shoulder strap slots are levelled with your child’s shoulders (27). too h