Besafe iZi Up X3 ISOfix User Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 9
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
14 15
Important advice
DO NOT attempt to dismantle, modify or add any part to the
seat. Warranty will expire if non-original parts or accessories
are used.
DO NOT use anything, such as a cushion, to raise the child
seat off the passenger seat of the vehicle. In an accident the
seat will not be able to protect your child in the right way.
Never leave your child unattended in the seat.
Make sure all passengers are informed about how to release
your child in case of emergency.
An unoccupied child seat should always be fastened in
the vehicle.
Make sure luggage or other objects are properly secured.
Unsecured luggage may cause severe injuries to children and
adults in case of accidents.
Never use the seat without the cover. The cover is a safety
feature and may only be replaced by an original BeSafe cover.
Under the cover we use EPS foam. Do not push or pull too
hard against the foam, as you might damage the foam.
Do not use any aggressive cleaning products; these may harm
the construction material of the seat.
BeSafe advises that child seats should not be bought or sold
second-hand.
KEEP this user manual for later use with the seat.
DO NOT use at home on a table or worktop, as long as your
child is seated in the seat.
When installed with ISOfix: Check the manufacturer’s
vehicle handbook.
When the child seat is mounted in the car check all the areas
where the child seat might touch the interior. We recommend
using a (BeSafe) protection cover in these places to avoid cuts,
marks or discolouration on the interior of the vehicle, especially
in vehicles with leather or wooden interior.
Practical advice
15
The seat can be used with a 3-point car belt as a universal
Child Restraint System. It is approved according to regulation
No. 44.04, series of amendments for general use in vehicles
fitted with 3-point car belts, approved to UN/ECE Regulation
No. 16 or other equivalent standards.
In cars with positions approved as ISOfix positions (as detailed
in the vehicle handbook), the seat can be used with the
FIX connectors.
The seat is suitable for fixing into the seat positions of the
vehicles listed in the separate ‘car list’. Seat positions in other
vehicles may also be suitable to accept this child restraint.
If in doubt, consult either your retailer or the child restraint
manufacturer. For updated car list see: www.besafe.eu.
!
Point of sale information- Notice for FORWARD-FACING
BELT installation and FIX installation
Page view 7
1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments