BESAFE iZi Go User Manual download pdf (Page 7)

12 13

Correct installation

Warning: potential misuse

• It is NOT ALLOWED to mount the seat in a front

passenger seat WITH AN ACTIVATED AIRBAG.

• DO NOT use the seat positioned in the vehicle, with

the carrying handle in a downward position. The

handle must be in the vertical carrying position while driving.

• Install only with 3-point car belts, approved according to UN/

ECE Regulation No.16 or other equivalent standards (21).

• Hip belt through the hip belt hooks over the seat (22).

• Shoulder belt through the shoulder belt hook at the rear side

of the seat.

• Seat belt fastened.

Cleaning instructions

• The cover of the seat must be washed according to the

instructions on the inside of the cover (20).

• DO NOT use any aggressive cleaning agents; these may

harm the construction material of the seat.

wash with similar colours

(20)

Removing and reﬁtting the cover

Removing the cover

Reﬁt the cover

• Pay attention when you remove the cover, as ﬁtting the cover

is done in the opposite way.

• Take off the headrest and the baby cushion.

• Open the zippers. Do not remove the harness straps from the

hooks in the seat.

• Take off the complete cover by pulling it carefully from the

foam.

• Pull the harness straps through the openings in the cover and

close the zippers.

• Pull the buckle through the crotch strap cover and pull the

hole for the central adjuster over the central adjuster.

• Fix the cover at all sides by putting it carefully between the

foam and seat shell.

shoulder

belt

hip belt

(21)

(22)

1 2 3 4 5 6 7 8 9

No comments

BESAFE iZi Go User Manual Page 7