www.besafe.eubelteAECE R44/04 E4ECE R44/04semi-universal 9-18 kg04443550User ManualGBISOfix floor support installationBelt installationComplies with rev
10By turning the reclining knob (7), the iZi Comfort can be put in upright position or in sleeping position. Sleeping position Car seat protectionTo a
11To release the ISOfix connectors (10), simultaneously push the ISOfix safety switch (6) and pull the ISOfix release switch (5) Do this for both sides.
12After an accidentAfter an accident, the iZi Comfort and your car seat belts should be replaced. Although they may look undamaged, if you were to hav
13GuaranteeAll BeSafe products are carefully designed, manufactured and tested. All of our BeSafe child safety seats are tested periodically out of o
14Pay attention when re-assembling the belts; make sure the belts are hooked correctly onto the metal hooks. Removing and refitting the coverRemoving t
15Cleaning harness and seatThe cover of the iZi Comfort should be washed in accordance with the instructions (on the inside of the cover). Washing ins
16Warning: Potential misuse!DO NOT use the iZi Comfort with floorsupport folded in. !DO NOT leave space between the back of the iZi Comfort and the car
17Belt installationCorrect installation ISOfix installation
18 !AIRBAGImportant adviceDO NOT use on a passenger seat fitted with activated frontal airbag.activated frontal airbag.-DO use the child
19 !Rigid items and plastic parts of the iZi Comfort must be so located and installed that they are not liable, during everyday use of the vehicl
2 !Vital informationVital information 2Preparing to install 4Belt installation 6ISOfix floor support installation 8Sleeping
2007 - v3.5This is a semi-universal ISOfix CHILD RESTRAINT SYSTEM. It is approved to regulation No. 44.04, series of amendments for general use in vehi
3AIRBAGAIRBAGBeSafe advices that child seats should not be bought or sold second-hand. Many seats sold through local advertising and car-boot sales ha
45691081 Belt clamp2 Central adjuster3 Belt tensioner4 Sliding release handle5 ISOfix release switch (2x) (red/green indicator)6 ISOfix safety butto
5For høytFor lavt Riktig!Height adjustment of harness systemAdjusting the height of the shoulder straps is done by moving the adjustment bar on th
6belte Belt installation Take the 3-point-belt from the retractor. Move the lap belt around the iZi Comfort, along the bottom of the seat, click in. P
7belteAIRBAG!!Close both belt clamps (1). By doing so the 3-point-belt is fixed.5678Make sure the 3-point-belt is as tight as possible, repeat the proc
82Click the ISOfix connectors (10) in the ISOfix anchorages (9). Make sure both indicators (5) are GREEN.Pull the sliding release handle fully upward (4
934Push the iZi Comfort firmly into the vehicle seat. Check for secure installation by pulling the harness system firmly.The iZi Comfort is now ready to
Comments to this Manuals